rcT2G

The rcAP 3.2020 outdoor radio access point (Q2 product line, Q2-AP) provides a robust solution based on the Power Architecture® T2080 multi-core processor with high computing power, which provides a high level of encryption for cybersecurity applications.

All connectors such as power, Ethernet, antenna connectors, etc. are located on the front side of the enclosure. Service connectors are placed under the aluminum cover. For advanced diagnostic purposes provides build in mSATA storage and GPIO interface with I/O.

The device complies with EN 50155, EN 62368-1 and EN 45545 standards and provides IP65 rating.

GENERAL SPECIFICATIONS:

• WLAN interfaces  
  • 2 x WLAN radio module (2.4 / 5.2 GHz)
  • 4 x TNC (F) antenna connectors
• Communication standards
  • IEEE 802.11a/b/g/n (Wireless System)
  • IEEE 802.11k (Radio Resource Measurement)
  • IEEE 802.1Q VLAN IEEE 802.11i (Wireless Security)
  • IEEE 802.3u for 10/100BASE-T
  • IEEE 802.3ab for 1000BASE-T
  • IEEE 802.1X (Network Security)
  • IEEE 802.11r (Proactive roaming/handover)
  • IEEE 802.11k (Radio Resource Measurement)
  • IEC 62439-3:2016 (High availability Seamlessly Redundancy)
  • IEEE 802.1Q VLAN High radio power up to 1000mW 2.4GHz / 500mW 5.2GHz

COMPLIANCE:
(meets the following requirements and standards)

• EN 50155:2018-01
• IEC/EN62368-1:2015-03
• PN-EN 45545-1:2013-07
• PN-EN 45545-2+A1:2015-12
• IEC 62439-3:2016
• IP65 rating  

CONSTRUCTION:

• Dimensions (W x D x H): 256 x 170 x 70 mm
• Weight: Approx. 3.7 kg

The rcCLI 3.2020 radio client (Q2 product line, Q2-CLI) provides a robust solution based on the Power Architecture® T2080 multi-core processor with high computing power, which provides a high level of encryption for cybersecurity applications.

All connectors such as power, Ethernet, antenna connectors, etc. are located on the front side of the enclosure. Service connectors are placed under the aluminum cover. For advanced diagnostic purposes provides build in mSATA storage and GPIO interface with I/O.

The device complies with EN 50155, EN 62368-1 and EN 45545 standards and provides IP65 rating.

GENERAL SPECIFICATIONS:

• WLAN interfaces  
  • 2 x WLAN radio module (2.4 / 5.2 GHz)
  • 4 x TNC (F) antenna connectors
• Communication standards
  • IEEE 802.11a/b/g/n (Wireless System)
  • IEEE 802.11k (Radio Resource Measurement)
  • IEEE 802.1Q VLAN IEEE 802.11i (Wireless Security)
  • IEEE 802.3u for 10/100BASE-T
  • IEEE 802.3ab for 1000BASE-T
  • IEEE 802.1X (Network Security)
  • IEEE 802.11r (Proactive roaming/handover)
  • IEEE 802.11k (Radio Resource Measurement)
  • IEC 62439-3:2016 (High availability Seamlessly Redundancy)
  • IEEE 802.1Q VLAN High radio power up to 1000mW 2.4GHz / 500mW 5.2GHz

COMPLIANCE:
(meets the following requirements and standards)

• EN 50155:2018-01
• IEC/EN62368-1:2015-03
• PN-EN 45545-1:2013-07
• PN-EN 45545-2+A1:2015-12
• IEC 62439-3:2016
• IP65 rating  

CONSTRUCTION:

• Dimensions (W x D x H): 256 x 170 x 70 mm
• Weight: Approx. 3.7 kg

rcSWT 2.2121 (Q2 product line, Q2-AP-C) is ideal for mission critical applications that requests high availability and short time of network recovery and for any applications with need of high speed data transfer (e.g. transfer large amounts of video, voice and data over the network) up to 10 Gbit/s.

The switch includes SFP/SFP+ slots for use with a choice of optical or metallic connections. In addition to the switch's basic functions, it is enhanced with an internal computer that is connected via an internal bus as an integral part of the switch, and is based on the Power Architecture® T2080 multi-core processor with high computing power that provides a high level of encryption for cybersecurity applications.

GENERAL FEATURES:

• Maximum Switching Bandwidth 80 Gbps
• L3 static and dynamic routing (RIP v2, OSPF v2 v3)  
• 32 MBit of integrated shared packet memory  
• Jumbo frame support
• Port Mirroring
• QoS - supports four QoS queues per port interface with strict or weighted fair queuing scheduling - CoS (Class of Service) - 8 priority levels; PFC; QoS Control List; QoS Egress Port Shapers / Ingress Port Policers / Egress Port Scheduler for all port interfaces
• ACL (Access Control List)
• DHCP server (IPv4) 
• DHCP snooping (IPv4, IPv6)
• IGMPv2, IGMPv3 support
• IGMP snooping
• SNMP v1/v2/v3 for network management  
• Management interfaces: CLI interface, Web interface - L3 static routing  
• Main CPU - Computer with Power Architecture® T2080 processor (OS Linux) connected to the switch via internal bus 1 Gbps
• Connection and operation in HSR network type

INTERFACES:

• 4 x 10 GbE SFP+ slots  
• 8 x 1 GbE SFP slots  
• 12 x 1 GbE RJ45 (auto-negotiation 10/100/1000 Mbps)  
• 1x DC Input 24 V DC (16 to 36 V DC) with 1.5 kV isolation, M12 A connector (M)  

ENVIRONMENT:

• Operating temperature range: -10 °C to +70 °C (optionally -40 °C to +85 °C)
• Relative humidity: 0 % to 95 %   Internal fan cooling

COMPLIANCE:
(meets the following requirements and standards)

• IEEE 802.3 (10BASE-T)  
• IEEE 802.3u (100BASE-T)  
• IEEE 802.3ab (1000BASE-T)  
• IEEE 802.3z (1000BASE-X)  
• IEEE 802.3ae (10GBASE-T)  
• IEEE 802.3ad (Link Aggregation / Port Trunk)  
• IEEE 802.3x (Flow control)  
• IEEE 802.1Q (VLAN tagging)  
• IEEE 802.1Qbb (QoS)  
• IEEE 802.1D-2004 (Spanning Tree Protocol)  
• IEEE 802.1s (Multiple Spanning Tree Protocol)   IEEE 802.1w (Rapid Spanning Tree Protocol)  
• IEEE 802.1p (Class of Service)  
• IEEE 802.1X (Network Security)  
• IEC 62439-3:2016 (High availability Seamlessly Redundancy)
• SNMP v1/v2/v3    

CONSTRUCTION:

• Dimensions (W x D x H): 480.2 x 204.5 x 44.0 mm
• Weight: Approx. 3.7 kg

rcSPL 1.3801 (rcSPL product line) is ideal for dividing the radio signal for covering of wide area or divided areas from the one radio input device.

Intended for WLAN networks based on the standard IEEE 802.11, a/b/g/n or similar type networks.

Reduces the number of devices as radio signal sources to cover given area.

Electrical data

• Frequency input/output range R2.x/A2.x.x: 2400 kHz ÷ 2483 kHz
• Frequency input/output range R5.x/A5.x.x: 5150 kHz ÷ 5925 kHz

Interfaces

• Input / Output: TNC (f)
• Normal impedance: 50 Ohm    

Construction data

• Dimensions (W x D x H): 130 x 130 x 51 mm
• Weight: 0,450 kg

Compliance

• IP protection: IP54 rating
• 2011/65/EU (RoHS) incl. 2015/863 and 2017/2102 Compliant

rcANT 1.2101 (rcANT production line) is with propagation the radio signal in two directions to cover the "path" without radio signal degradation compared to using multiple antennas and other passive modules (antenna system) to split the radio signal from a single radio input device. Designed for WLANs based on IEEE 802.11, a/b/g/n or similar.

The antenna design practically reduces the number of antennas used in antenna systems and, at the same time, when splitting the radio signal into two given directions, limits the propagation of the radio signal outside the required coverage area and thus does not contribute to increasing the level of radio noise outside the coverage area.

ELECTRICAL DATA

• Interface 2.4 – frequency band
  
  • 2400 kHz ÷ 2483 kHz
  • Gain 7 dB
• Interface 5 – frequency band
  
  • 5150 kHz ÷ 5925 kHz
  • Gain 8 dB
• Polarization: Horizontal

INTERFACES

• Input / Output: 2x TNC (f)
• Normal impedance: 50 Ohm    

ENVIRONMENTAL DATA

• Operational temperature: -40 °C to +70 °C
• Operation Humidity: 5 % to 95 %
• Pressure compensation valve

CONSTRUCTION DATA

• Dimensions (W x D x H): 255 x 95 x 51 mm
• Weight: 0,550 kg
• Mounting: 2 x M6 screw

COMPLIANCE

• IP Protection: IP65 rating
• UL 94 (V0), Flame retardant
• 2011/65/EU (RoHS) incl. 2015/863 and 2017/2102 Compliant