rcMAV
rcMAV system
The rcMAV system consists of several basic technology blocks that are interconnected via a transmission environment based on the Ethernet standard. Controlled wireless communication systems are used to connect the systems and other technological blocks in the infrastructure and mobile means of the transport to achieve optimal connectivity and ensure reliable and permanent communication links.
The modularity of this system provides easy integration with other systems/applications/services via Ethernet standard interconnection, which provides advanced and easy interconnection of mobile and infrastructure parts through a T2G (Train to Ground) type of transmission communication system.
The rcMAV system consist of several technological blocks:
rcMAV-T2G
The T2G (Train to Ground) technological block provides transparent transmission path based on the Ethernet standards as a permanent, reliable, controlled and encrypted connection for managed data transmissions (including QoS) in critical applications (ATP/ATC/CBTC/FRMCS) or for other technologies/applications (CCTV, Voice, diagnostic and general data) with need of data transmissions between mobile and infrastructural parts.
rcMAV-CRTA
A technology providing an interface for connection of technological block / systems / applications with need of critical data transmissions between mobile and infrastructural part (e.g. ATP/ATC/CBTC/FRMCS)
rcMAV-CCTV
A technology providing monitoring and recording in the mobile part and in the infrastructure. In connection with the transmission system (T2G), it is possible to transmit on-line the image (stream) from cameras (with defined latency) or recordings from recording devices between the mobile and infrastructure parts of the monitoring systems.
rcMAV-DATA
A technology providing an interface for connecting other systems/applications whose data are transmitted between the mobile and infrastructure parts via a transmission system (T2G).
rcMAV-NET
Technology and technological equipment of standard Ethernet type networks (active and passive network elements, optical/metallic cable routes, etc.) for the mobile and infrastructure part ensuring interconnection and integration with the required technologies.
rcAP 3.2020 - dual radio access point
Dual radio access point for equipping of infrastructural parts to provide wireless communication in two frequency bands simultaneously with mobile assets according to IEEE 802.11 a/b/g/n. It is an ideal solution as a wireless linking device for communication between a mobile asset (rail/ground vehicle) and infrastructure including T2G (Train to Ground) communication systems type.
The rcAP 3.2020 outdoor radio access point (Q2 product line, Q2-AP) provides a robust solution based on the Power Architecture® T2080 multi-core processor with high computing power, which provides a high level of encryption for cybersecurity applications.
All connectors such as power, Ethernet, antenna connectors, etc. are located on the front side of the enclosure. Service connectors are placed under the aluminum cover. For advanced diagnostic purposes provides build in mSATA storage and GPIO interface with I/O.
The device complies with EN 50155, EN 62368-1 and EN 45545 standards and provides IP65 rating.
GENERAL SPECIFICATIONS:
- WLAN interfaces
- 2 x WLAN radio module (2.4 / 5.2 GHz)
- 4 x TNC (F) antenna connectors
- Communication standards
- IEEE 802.11a/b/g/n (Wireless System)
- IEEE 802.11k (Radio Resource Measurement)
- IEEE 802.1Q VLAN IEEE 802.11i (Wireless Security)
- IEEE 802.3u for 10/100BASE-T
- IEEE 802.3ab for 1000BASE-T
- IEEE 802.1X (Network Security)
- IEEE 802.11r (Proactive roaming/handover)
- IEEE 802.11k (Radio Resource Measurement)
- IEC 62439-3:2016 (High availability Seamlessly Redundancy)
- IEEE 802.1Q VLAN High radio power up to 1000mW 2.4GHz / 500mW 5.2GHz
COMPLIANCE:
(meets the following requirements and standards)
- EN 50155:2018-01
- IEC/EN62368-1:2015-03
- PN-EN 45545-1:2013-07
- PN-EN 45545-2+A1:2015-12
- IEC 62439-3:2016
- IP65 rating
CONSTRUCTION:
- Dimensions (W x D x H): 256 x 170 x 70 mm
- Weight: Approx. 3.7 kg
rcCLI 3.3020 - dual radio client
Dual radio communication client for equipping of mobile asset (rail/ground vehicle) to provide wireless communication in two frequency bands simultaneously with the infrastructural part according to IEEE 802.11 a/b/g/n standard. It is an ideal solution as a wireless linking device for communication between the mobile asset (rail/ground vehicle) and the infrastructure including the T2G (Train to Ground) communication system type.
The rcCLI 3.2020 radio client (Q2 product line, Q2-CLI) provides a robust solution based on the Power Architecture® T2080 multi-core processor with high computing power, which provides a high level of encryption for cybersecurity applications.
All connectors such as power, Ethernet, antenna connectors, etc. are located on the front side of the enclosure. Service connectors are placed under the aluminum cover. For advanced diagnostic purposes provides build in mSATA storage and GPIO interface with I/O.
The device complies with EN 50155, EN 62368-1 and EN 45545 standards and provides IP65 rating.
GENERAL SPECIFICATIONS:
- WLAN interfaces
- 2 x WLAN radio module (2.4 / 5.2 GHz)
- 4 x TNC (F) antenna connectors
- Communication standards
- IEEE 802.11a/b/g/n (Wireless System)
- IEEE 802.11k (Radio Resource Measurement)
- IEEE 802.1Q VLAN IEEE 802.11i (Wireless Security)
- IEEE 802.3u for 10/100BASE-T
- IEEE 802.3ab for 1000BASE-T
- IEEE 802.1X (Network Security)
- IEEE 802.11r (Proactive roaming/handover)
- IEEE 802.11k (Radio Resource Measurement)
- IEC 62439-3:2016 (High availability Seamlessly Redundancy)
- IEEE 802.1Q VLAN High radio power up to 1000mW 2.4GHz / 500mW 5.2GHz
COMPLIANCE:
(meets the following requirements and standards)
- EN 50155:2018-01
- IEC/EN62368-1:2015-03
- PN-EN 45545-1:2013-07
- PN-EN 45545-2+A1:2015-12
- IEC 62439-3:2016
- IP65 rating
CONSTRUCTION:
- Dimensions (W x D x H): 256 x 170 x 70 mm
- Weight: Approx. 3.7 kg
rcSWT 2.2121 - industrial intelligent L3 switch
Intelligent industrial 24-port Ethernet L3 switch with the extension of possibility to connect the High-availability Seamless Redundancy networks (HSR) and with integrated computer with processor Power Architecture® T2080.
rcSWT 2.2121 (Q2 product line, Q2-AP-C) is ideal for mission critical applications that requests high availability and short time of network recovery and for any applications with need of high speed data transfer (e.g. transfer large amounts of video, voice and data over the network) up to 10 Gbit/s.
The switch includes SFP/SFP+ slots for use with a choice of optical or metallic connections. In addition to the switch's basic functions, it is enhanced with an internal computer that is connected via an internal bus as an integral part of the switch, and is based on the Power Architecture® T2080 multi-core processor with high computing power that provides a high level of encryption for cybersecurity applications.
GENERAL FEATURES:
- Maximum Switching Bandwidth 80 Gbps
- L3 static and dynamic routing (RIP v2, OSPF v2 v3)
- 32 MBit of integrated shared packet memory
- Jumbo frame support
- Port Mirroring
- QoS - supports four QoS queues per port interface with strict or weighted fair queuing scheduling - CoS (Class of Service) - 8 priority levels; PFC; QoS Control List; QoS Egress Port Shapers / Ingress Port Policers / Egress Port Scheduler for all port interfaces
- ACL (Access Control List)
- DHCP server (IPv4)
- DHCP snooping (IPv4, IPv6)
- IGMPv2, IGMPv3 support
- IGMP snooping
- SNMP v1/v2/v3 for network management
- Management interfaces: CLI interface, Web interface - L3 static routing
- Main CPU - Computer with Power Architecture® T2080 processor (OS Linux) connected to the switch via internal bus 1 Gbps
- Connection and operation in HSR network type
INTERFACES:
- 4 x 10 GbE SFP+ slots
- 8 x 1 GbE SFP slots
- 12 x 1 GbE RJ45 (auto-negotiation 10/100/1000 Mbps)
- 1x DC Input 24 V DC (16 to 36 V DC) with 1.5 kV isolation, M12 A connector (M)
ENVIRONMENT:
- Operating temperature range: -10 °C to +70 °C (optionally -40 °C to +85 °C)
- Relative humidity: 0 % to 95 % Internal fan cooling
COMPLIANCE:
(meets the following requirements and standards)
- IEEE 802.3 (10BASE-T)
- IEEE 802.3u (100BASE-T)
- IEEE 802.3ab (1000BASE-T)
- IEEE 802.3z (1000BASE-X)
- IEEE 802.3ae (10GBASE-T)
- IEEE 802.3ad (Link Aggregation / Port Trunk)
- IEEE 802.3x (Flow control)
- IEEE 802.1Q (VLAN tagging)
- IEEE 802.1Qbb (QoS)
- IEEE 802.1D-2004 (Spanning Tree Protocol)
- IEEE 802.1s (Multiple Spanning Tree Protocol) IEEE 802.1w (Rapid Spanning Tree Protocol)
- IEEE 802.1p (Class of Service)
- IEEE 802.1X (Network Security)
- IEC 62439-3:2016 (High availability Seamlessly Redundancy)
- SNMP v1/v2/v3
CONSTRUCTION:
- Dimensions (W x D x H): 480.2 x 204.5 x 44.0 mm
- Weight: Approx. 3.7 kg
rcSPL 1.3801 - passive power splitter
Passive radio signal power splitter for 2.4 GHz and 5 GHz bands.
rcSPL 1.3801 (rcSPL product line) is ideal for dividing the radio signal for covering of wide area or divided areas from the one radio input device.
Intended for WLAN networks based on the standard IEEE 802.11, a/b/g/n or similar type networks.
Reduces the number of devices as radio signal sources to cover given area.
Electrical data
- Frequency input/output range R2.x/A2.x.x: 2400 kHz ÷ 2483 kHz
- Frequency input/output range R5.x/A5.x.x: 5150 kHz ÷ 5925 kHz
Interfaces
- Input / Output: TNC (f)
- Normal impedance: 50 Ohm
Construction data
- Dimensions (W x D x H): 130 x 130 x 51 mm
- Weight: 0,450 kg
Compliance
- IP protection: IP54 rating
- 2011/65/EU (RoHS) incl. 2015/863 and 2017/2102 Compliant
rcANT 1.2101 - dual–direction antenna
Infrastructural dual-direction antenna for 2.4 GHz and 5 GHz bands. It allows directional propagation of the signal in two directions without the use of additional elements to split the source radio signal.
rcANT 1.2101 (rcANT production line) is with propagation the radio signal in two directions to cover the "path" without radio signal degradation compared to using multiple antennas and other passive modules (antenna system) to split the radio signal from a single radio input device. Designed for WLANs based on IEEE 802.11, a/b/g/n or similar.
The antenna design practically reduces the number of antennas used in antenna systems and, at the same time, when splitting the radio signal into two given directions, limits the propagation of the radio signal outside the required coverage area and thus does not contribute to increasing the level of radio noise outside the coverage area.
ELECTRICAL DATA
- Interface 2.4 – frequency band
- 2400 kHz ÷ 2483 kHz
- Gain 7 dB
- Interface 5 – frequency band
- 5150 kHz ÷ 5925 kHz
- Gain 8 dB
- Polarization: Horizontal
INTERFACES
- Input / Output: 2x TNC (f)
- Normal impedance: 50 Ohm
ENVIRONMENTAL DATA
- Operational temperature: -40 °C to +70 °C
- Operation Humidity: 5 % to 95 %
- Pressure compensation valve
CONSTRUCTION DATA
- Dimensions (W x D x H): 255 x 95 x 51 mm
- Weight: 0,550 kg
- Mounting: 2 x M6 screw
COMPLIANCE
- IP Protection: IP65 rating
- UL 94 (V0), Flame retardant
- 2011/65/EU (RoHS) incl. 2015/863 and 2017/2102 Compliant